GAP 125ASX2 THX1800 active speaker system

GAP TPA THX1800 active speaker amplifier (220V) Description

Complete 3 way system for skilled DIY designers interested in absolute sound quality.

The GAP 125ASX2 THX1800 stereo 3-way active speaker system includes all necessary components to convert any passive speaker setup into an active system. This system's advantage is that it eliminates the need to integrate amplifiers and crossovers within the speaker enclosure. The only required modification is to disconnect the passive crossover and connect the internal speaker inputs to the provided 8-pole SpeakOn connector output. Two Icepower 125ASX2 boards to drive midrange and tweeter

The system comes with a 6-meter interconnection cable with the following specifications:

Tweeter: 1mm²
Midrange: 1mm²
Woofer: 2mm²

The power handling capabilities are:

Woofer: 600W
Midrange: 125W
Tweeter: 125W

System is using only professional grade boards.

By default, the system is supplied with a Behringer CX3400 stereo 3-way active crossover and XLR interconnection cables.

220V only. Does not support 110V

Included:

Mobile rack enclosure 4U
GAP 125ASX2 THX1800 2U 6 channel audio amplifier system (2x500W+ 4x125W )
Behringer CX3400 stereo 3-way active crossover
2x 6m 3-way speaker connection wire with 8 pole connectors
2x 8 pole panel mount socket for speaker modification
6 XLR patch cables for speaker interconnection
2x 6m Microphone cables for audio source connection
Silent fan cooling
Rack mount wall socket, EU standard with power cord

ICEpower 200AS2 board

Features

Fully integrated 3 way active speaker system
Balanced inputs
8 pole Speak On outputs
Rackmount fastening options
Fully integrated solution
Industrial grade boards

Benefits

Standardized rack mount dimensions enclosure
4U rack
Compatibility with any type or 3 way speakers
Flexible mounting and placing
Compatible with Professional 3 way crossover
Can be used in advanced home cinema scenarios
Replacing 3 way speaker pasive crossover and amplifier

Specification

500W stereo board

Key Specifications
500 W / 4 Ohm per channel ≤ 1 % THD+N, 1 kHz
0.005 % THD+N @ 1 kHz, 10 W / 4 Ohm 50 kHz audio bandwidth
Signal to noise ratio 112dB
Sleave rate 50V/us
Damping factor 1000
Input impedance 30kΩ
Mains voltage 220V

Amplifier 125ASX2

2 x 120W @ 1% THD+N, 20Hz – 20kHz, 4Ω, SE (both chan-nels driven)
220W (2Ω) + 58W (8Ω) @ 1% THD+N, 20Hz – 20kHz, SE (both channels driven with asymmetric load)
Max output voltage / current: 32Vp / 20Ap, 4Ω, SE
117dBA dynamic range (SE-mode)
THD+N = 0.002% @ 1W (8Ω,1kHz, SE-mode)
CCIF Intermodulation distortion = 0.0009%, 10W, 4Ω, 18.5kHz/1kHz
Selectable Mains 85-132VAC & 170-264VAC

Behringer CX3400 user manual and specification PDF

Warranty and refund policy

Fully operational prototype. Tested prior shipment. All equipment has been used for 12 month and passed all possible tests. For boards offering 2 Year warranties. Industrial boards will have long life time and can be replaced. Boards are available in retail.